E1701D is an XY2/100 and XY3/100 digital scanner controller card which can be extended by options described below and provides following features:

• 16 bit XY2-100 interface to scanhead with X, Y and Z channel
• 18 bit XY2-100-E interface to scanhead with X and Y channel
• 20 bit XY3-100 (certified LIA202002 standard) interface with X and Y channel
• 100 Mbit Ethernet connection
• USB 2.0 connection
• Realtime processing of laser and scanner signals
• Can control nearly every laser type
• Open source compatibility library that emulates existing programming interface
• Very small size of about 87 mm x 55 mm
• Hardware/firmware is quality made in Germany  

Download.PDF

LP8 Extension Board requires E1701D baseboard as described above
and provides additional signals for controlling lasers and external
equipment. It offers following features and functions:

• LP8 8 bit CMOS level parallel digital output e.g. for controlling laser power
• LP8 latch CMOS level digital output for usage with Raycus™ and compatible fiber laser types
• Master Oscillator CMOS level digital output for usage with Raycus™ and compatible laser types
• 8 bit 0..5V analogue output e.g. for controlling laser power
• Two laser CMOS level digital outputs for usage with YAG, CO2 and compatible laser types (outputs can provide PWM frequency, Q-Switch, FPK-pulse, continuously running frequency, stand-by frequency), running with frequencies up to 20 MHz

Download.PDF

The E1803D is fully compatible with an E1701D XY2-100/XY3-100 laser scanner control board with LP8 Extension and Digi I/O Extension plus additional:

• two analogue 0 to 10 V outputs, plus
• a serial RS232/RS485 interface, plus
• better performance, plus
• scanhead power supply provided via controller, plus
• XY2-200 and XY2-200E digital output
• now all incorporated in one compact card
• low-cost scanner card which can be used with all XY2-100, XY2-200, XY2-100E, XY2-200E and XY3-100 compatible scanheads.                 

                                                                                                                                    Download.PDF

E1701M 4-Axis Motion Controller

• 8 digital outputs providing either CMOS logical levels or electrically insulated outputs via external power supply for controlling 4 motors via step and direction signals
• 8 freely usable digital inputs expecting either CMOS logical levels or electrically insulated inputs via external power supply for usage with limit-/reference switches or encoder inputs
• Two decoders for evaluation of axis position via quadrature encoder signal
  -alternative operation mode: jog-control (manual/stand-alone), signals at inputs start movement of related axes
• alternative operation mode: I/O controller card with 8 independent digital outputs and 8 digital inputs
• Very small size of about 87 mm x 55 mm
• Hardware/firmware is quality made in Germany                   

Download.PDF